For personal safety and minimized risk of damage to your machine, you must first ensure the machine is fastened securely. Use the two threaded ¼ 20 bolt holes provided in the base for mounting. For your convenience, a template is supplied with the box your machine comes in and should be used as a guide for drilling into your countertop.

Change from AC to DC power source

When everything is secured, locate the 2 12 volt cable connectors at the back of the casing. They will be red (Positive) and black (Negative).

What gauge wire should I use? Use number 8 gauge wires or thicker and install an inline 20 amp fuse at the power source.

What length should the wire be? Use the shortest length possible to a maximum of 20ft. Otherwise, voltage drops may be experienced and may result in improper functioning of your machine.

Should I use stranded or solid core cable? A stranded cable is easier to handle.

Is it better to use connectors or no connectors? Always use connectors.

What is the peak amperage on 12 volt? 10 amp pk.

Tip: An auxiliary battery with an isolation module is recommended to avoid running down the truck battery.